| Customization: | Available |
|---|---|
| Material: | Zircon |
| Refractoriness (℃): | 1580< Refractoriness< 1770 |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The Physical and Chemical Indicators
| Zr33# material physical and chemical indicators | ||
| Material | Zr28% puritry | |
| Chemical Component(%) | AL2O3 | ≥65 |
| ZrO2 | ≥19 | |
| SIO2 | ≤15 | |
| Fe2O3 | ≤0.1 | |
| Apparent porosity | ≤17 | |
| Density | ≥3.0 | |
| Pressure resistance strength | ≥110Mpa | |
| RUL | ≥1700 | |
1. No shrinkage cavities
2. Low apprant porosity
3. High corrosion resistance
4. No pollution on glass liquid
5. Long service life about 1-2 years
6. Strong mechnical strength
7. High refractoriness under load
8. Good thermal shock resistance
The history of making glass bottles is too long. The production process of making bottle is as follows: the glass melting furnace supplies material to two production lines in the same time, which include the feeder channel, the feeder machine, and the making-bottle machine. The entrance of the two feeder is connected to the exit of glass liquid in the glass melting furnace, and the entrance of the feeder channel is connected to feeder spout and the exit of the spout is connected to the bottle making machine through the orifice ring, Due to the influence of height difference, the glass liquid in the glass melting furnace naturally flows into the spout.
For the sillimanite spout, after the physical effoects and the chemical erosion of the glass liqure, the factory will change the spout within 8months. If the spout cant change in time, some safe problem will happen. When changing the spout, in the feeder channel, the glass liqure should be steady in the height as the normal production because only in this height, there is much glass liqure in the feeder channel and spout, When close the entrance of the feeder channel, need use much broken glass and it is very difficult to change the pout. When finish the spout, need let the broken glass melted and leave. When melting the broken glass, it will take more time to change the spout and in this way, it will take about 20 hours to change the spout. And if operate wrongly, will cause the bad effort.
1. Are you a manufacturer or trader?
We are a manufacturer.
2. What's the MOQ?
For the normal size, there is no MOQ. For your own demand size,the MOQ IS 100PIECES.
3. Why should you buy from us not from other suppliers?
*Professional manufacturer since 1998.
* The most professional technology team and production team
* 5 production lines
*An annual output of nearly 20,000 tons and hundreds of employees
*Customized according to your requirements or drawings
*Inventory available for quick shipment
4. Do you provide free samples?
Yes, we can offer free samples
5. How do you guarantee quality?
Before pre-production, we will produce a batch of samples for quality inspection; product quality will be checked again before delivery.
6. Can we visit your factory?
Yes,of course . We sincerely welcome you to come to China and visit our factory.
){kind=link}